11 Methods To Redesign Completely Your Ghost Tracker Installation

· 6 min read
11 Methods To Redesign Completely Your Ghost Tracker Installation

Ghost Tracker Installation

A ghost tracker installation is a discreet system that can be incorporated to your vehicle without cutting wires or removing any key fobs. This will ensure that the warranty of your vehicle is not affected, and its aesthetics are not compromised.

Autowatch Ghost is an innovative aftermarket immobiliser that shields your vehicle from key cloning, hacking as well as ECU swapping. It operates quietly and is integrated into the CAN data network of your vehicle.

CANbus Immobiliser

A system that prevents unauthorized persons from starting or driving the vehicle is needed. The invention's CAN-based Imobiliser can accomplish this without needing any modifications to the vehicle's wiring system or existing CAN data. It accomplishes this by removing the logical aspect as opposed to other methods that alter the physical low and high bus lines of the CAN transceiver.

The CANbus immobiliser monitors the computer network in your car for a request to begin from the factory ignition system. When a valid start request is received the Ghost will wait until it is authorized by you either with the use of a button sequence (4-21 presses on your vehicle's buttons) or a mobile smartphone with an App (depending on model) before allowing engine starting. It will also disable existing key fobs or alarms and, in case the original key fob was stolen, it will not be able to start your vehicle.

The CANbus immobiliser is the only item on the market that can prevent key cloning as well as other forms of auto theft. It's a straightforward device and can be purchased online from various retailers and then installed at home by those who have a basic understanding of electrical. In the UK there are numerous professional installers that offer this service.

When the system is activated, it will block engine starts by interfering with the CAN bus signaling between the ECU and other devices within the vehicle. This is accomplished by a tiny microprocessor that detects CAN signals that are sent between the ECU and other devices inside the car. The microprocessor translates the signal and injects it into the CAN bus. This fake message alerts other devices that an ECU-subsystem that is in question is busy and stops them from sending commands to this particular ECU.


Based on the model, it can be combined other features like the GPS tracker or battery monitoring. The same mobile application can be used to access these additional features, making it simple to use. The Ghost is also TASSA certified, which is vital because insurance companies will need proof of your immobiliser prior to covering any damage that could occur to the vehicle or it's contents.

Discreet & Silent

Unlike many other systems, that can be heard on the stereo system in your vehicle and thus easily detected by criminals, ghost trackers are hidden within your car, which means they can never know that it's there. It also works silently which means that criminals won't be aware of the alarm if they are near to your vehicle. This is a revolutionary system that offers a superior level of security that cannot be beaten by thieves. You can change the pin code at any time to ensure that you're the only person to know that it's there. In addition, it makes use of CAN to connect with your vehicle, which means it is able to be used in a variety of automobiles and even fitted in certain models that do not have an OBD port.

In recent years, criminals were able of gaining access to vehicle security systems using an easy hack. Ghost immobilisers, on other hand, operate in a discreet manner to stop key duplicates. They connect to the CAN data network of your vehicle and stop it from running until you enter the secret pin code via the buttons on your dashboard and the steering wheel. This makes it difficult for thieves to identify or alter the device.

Ghost immobilisers work in a variety of vehicles. This makes it simple to locate the perfect one for your vehicle. You can also transfer them to another vehicle if you decide to do so later.

However, you must make sure that your ghost immobiliser is fitted by a certified installer to prevent any security issues or technical issues. This is especially important since the device needs to be wired into your vehicle's electronics and requires a lot of specialised knowledge and tools. Furthermore, this process could take some time and should be completed by an experienced professional. This will increase the cost of the installation, but it will give you peace of mind for a lifetime and protection from theft. This is a great way to lower your insurance premiums and save money over the course of time.

No Key Fobs Required

Ghost immobilisers can provide an additional layer of vehicle's security, preventing key cloning or hacking. The device will not allow thieves to start your vehicle until a PIN code is entered. It can be deactivated quickly when you take your vehicle to valet parking or service. It's also fully insurance approved easy to set up, and discrete.

The data loop of CAN is used to connect the ghost device directly to the vehicle's communication network, which is different from other security systems that rely on keys fobs or remotes. It's therefore completely unnoticeable and isn't detected by diagnostic scanners or other advanced devices that thieves might use to disable the system. This makes the GHOST system extremely difficult for thieves to bypass this is why it's a top choice among many auto experts.

When installed by a certified installer, the device will integrate seamlessly into your vehicle, without needing any cutting or splicing wires. This protects the warranty of your vehicle and helps prevent interference from other devices. It also allows you to transfer the system to another vehicle in the event that you decide to sell it.

Based on the ghost tracker you choose It will have various features. Some ghost trackers come with GPS tracking features which let you know where your car is in real-time. Some will also provide detailed reports on your driving and fuel consumption. You must carefully study each option to find the best option for your requirements.

It is also essential to make sure your installer is certified by an independent authority before you hire them. This will help you avoid receiving substandard work that could compromise the safety or security of your vehicle. A reputable installer should be able provide you with documents that demonstrate their credentials and training. Keep all receipts, correspondence and receipts from the installer in case of future claims.

The proper installation is vital for protecting your investment and providing peace of mind. Car Keys Solutions' experts are available to assist you in locating the most suitable solution for your needs.

No Radio Signals

Ghost trackers aren't radio frequency transmitters, in contrast to other security systems which use RF signals to detect the presence of a vehicle. They are therefore inaccessible to thieves who use sophisticated technologies like RF scanning or code-grabbing to identify the type security system in vehicles.

Ghost trackers do not lose power when exposed to strong electromagnetic fields (EMFs) like the ones generated by an electric generator located nearby or a high-powered radar. They function because they are built around a circuit which is not affected by EMFs. However,  ghost immobiliser car  to note that these systems are not designed to withstand an immediate lightning strike or electromagnetic surge.

Ghost trackers aren't just for the faint of heart They are utilized in paranormal research and investigation. They are often used in conjunction with full-spectrum cameras to help investigators see areas of the spectrum that are not visible to the naked eye. Full-spectrum camera also allows investigators to capture a variety of paranormal events including unexplained infrared emission and shadows that could suggest the presence of supernatural entities.

When used in conjunction with when paired with a GPS tracking device, ghost trackers can aid investigators in locating the locations of spirits. This is especially beneficial for large spaces, like haunted theatres, where lots of ghosts may congregate in one space. Utilizing GPS to locate the exact location of a ghost can accelerate the search for the ghost, and aid in the capture process.

A ghost immobiliser can be a great security measure for owners of high-performance cars or luxury vehicles. It will not only stop your vehicle from being stolen by cloning or swapping the ECU However, it also reduces your insurance premiums. Trackershop Midlands is a Thatcham-approved installer of ghost immobilisers that will safeguard your car from thieves. They can also be easily hidden.

The Autowatch Ghost immobiliser is discreet and can be fitted to any vehicle. It communicates silently and connects directly to CAN data network in your car which makes it almost unnoticeable. It requires no additional hardware or wiring, and it can be changed at any time by entering a PIN. It is also compatible with a GPS tracker to locate your car, helping with recovery in the event of a car theft.